we provide a full end to end mechanical engineering solution

EEA

Tyre Inspection Stand

Wheel Chock

Tyre Assembly Stand

Rim Component Stand



EEA Products

EEA manufactures a range of products. These products are specialist designed to suit specific applications and are for mine site and heavy industrial workshop use.

EEA Tyre Equipment has evolved through work with our clients who deal with large and ultra class Off the Road Tyres and related components. Our clients have proposed concepts and EEA has produced the designed products required to meet their needs.

All products and equipment are engineer certified and are provided with certification plates and Certificates of Compliance to the appropriate Australian Standard.

Tyre Inspection Stand

Our EEA Tyre Inspection Stand allows your tyre service personnel to inspect and prepare the tyre in complete safety. There is no standing under suspended loads and a handler is not required for an inspection.

The upper crossbeam is fitted with an anchor point for any harness or weightless hoist that may be used inside the tyre. Accessories such as lights, air and fluid fittings are optional.

Wheel Chock

Our EEA Ultra Class wheel chock is designed to fully support an Ultra Class haul truck stopped on a haul ramp (as a set of two). Made from high strength aluminium, the chock is designed and certified to support 30 Tonnes load per chock.

The Chock is lightweight, weighing less than 15kg and includes a recessed handle. The handle is ergonomically designed to allow an operator to lift and carry the chock without injury.

Tyre Assembly Stand

Our Tyre Assembly Stand is designed to allow easy and safe assembly of a tyre and rim components.

A rim can be placed on the stand by a tyre handler and the rim components and tyre placed on accordingly.

This stand ensures that the tyre is supported correctly to allow the tyre to seat onto the bead seat properly. The stand eases difficulty in finally installing the bead seat band and lock ring.

The Stand is available in 3 different sizes:

  • < 39”
  • 45” - 51”
  • 57” - 63”

Larger Stands are fitted with a grate to enable service personnel to stand safely whilst working.

Rim Component Stand

Our Rim Component Stands are designed to hold Bead Seat Bands, Flanges and Lock Rings, all on the same stand. We have designed our Rim Component Stands to accommodate the heavy designed components of up to 4 rims at a time.

The components can be placed on the stand by a forklift and also moved by forklift.

Stands for various sized components are available to order for:

  • 29” - 35”
  • 45” - 49”
  • 51” - 57”
  • 57” - 63”